 |
 9 Pc Roll Pin Punch Set GRIP NIB Pilot Punch $8.25 |
 New 18 Pc Brass And Steel Punch Set Pin Center Punches Home Business Hand Tool $18.99 |
 GUNSMITH T HANDLE TOOL PIN PUNCH SET NEW $15.95 |
 Snap On Punch and Roll Pin Set C 123 Punches $80.00 |
 6pc Mechanics Pin Punch and Center Punches New Set Tools Steel Long $14.95 |
 TEKTON 6739 Pin Punch Set 6 Piece Hardened Steel $10.99 |
 New 8pc Pin Punch Set 4 Brass 4 Chrome ST1024C $14.99 |
 TEKTON 6739 Pin Punch Set 6 Piece $14.94 |
 NEW GRIP 9 Pc Forged Steel Roll Pin Punch Set Tools Chisel $16.79 |
 VINTAGE SET 8 STARRETT DRIVE PIN PUNCHES No S565 $17.50 |
 8Pc 200Mm Silverline Pin Punch Long Parallel Set Kit Heavy Duty $11.55 |
 Stanley Pin Punch Set 16 226 $19.95 |
 Starrett S248PC 5 Piece Drive Pin Punch Set 1 83 161 45 163 8 8 Long New $39.95 |
 8pc Pin Punch Set 4 Brass 4Chrome SKU ST1024C $14.97 |
 Grip 5 pc 8 Pin Punch Set 61128 $8.20 |
 5 Piece Extra Long Drive Pin Punch Set $19.99 |
 7 pc Long Pin Punch Set New in Pouch $30.00 |
 9 Pc Roll Pin Punch Pilot Pin Set USA $44.50 |
 TEKTON 6739 Pin Punch Set 6 Piece $15.91 |
 Michigan Industrial Tools 6 pc Mechanics Pin Punch Set $23.95 |
 12 Pc Roll Pin Punch Pilot Pin Set USA Mayhew USA $68.88 |
 Snap On Cape Chisel 6 Punch Roll Pin Set $40.00 |
 5 Piece Pin Punch Set $10.00 |
 PIN PUNCH SET 8 PIECES $11.09 |
 WILTON Hargrave 5 pc Drive Pin Punch Set $13.50 |
 Mayhew USA 5 PC Extra Long Pin Punch Set New $22.50 |
 True Grip 5 pc Pin Punch Set $7.99 |
 Grip 6 pc Interchangeable Pin Punch Set $10.00 |
 16 PC MECHANICS STEEL PIN PUNCH AND CHISEL TOOL SET $24.99 |
 RTS Prestige 8pc Drive Pin Punch Set 1 16 5 16 NEW BD2 $16.95 |
 NEW SNAP ON MODEL PPR708BK 8PC ROLL PIN PUNCH SET 1 16 1 4 $49.99 |
 6 pc Interchangeable Pin Punch Set New $13.00 |
 6 Piece Roll Pin Punch Set USA Pilot Spring $37.80 |
 John Deere 6 Piece Pin and Punch Set $30.59 |
 Long Pin Punch Set 4 Pc High Quality $10.00 |
 Allen 6 Pc Heat Treated Steel Pin Punch Set Made in USA $18.99 |
 Matco Tools SPPB3K 3 Piece Brass Pin Punch Set 1 4 5 16 3 8 $36.00 |
 18pc SOLID BRASS AND STEEL PUNCH SET PIN CENTER $22.99 |
 10 Pc T E Pilot Punch Roll Pin Punch Set $36.50 |
Pin Punch Set
Find out more about Pin Punch Set below
Using Your SureBind System With Your Plastic Comb Binding Punch by Jeff McRitchie
SureBind was designed to be compatible with GBC Plastic Comb Binding systems. This means paper and covers can be punched on any GBC Plastic Comb Binding punch, and bound using the SureBind System; which increases production by gaining higher punching capabilities, and allowing two operators to work at the same time.
SureBind strips were designed to fit or align with the rectangular holes produced by a Plastic Comb Binding punch. The SureBind strips fit through every other hole of the 19 hole punched paper. The first pin is located at the end of the first hole and the second pin is located at the beginning of the third hole. These posts take the "play" out of the document and keep it from moving between the strips after being bound. All other posts fall in the center of the rectangular holes. Take a piece of paper punched with the rectangular holes and feed a SureBind strip through the holes to see exactly how it aligns.
You already know how to punch paper with all of GBC's plastic binding machines, so the actual punching should not be a problem. However, you do have to make some very important adjustments on the plastic binding unit before you punch the paper to be used with Surebind.
First, adjust the Side Guide on the Comb Binding machine so that the 19 holes are perfectly centered on your 11" sheet.
Next, adjust the Back Guide Depth setting on the Comb Binding unit to the middle setting. Note: To increase the productivity of the binding unit, only use ten punch pins for SureBind. This allows you to increase the thickness of the lift you are punching, because you are using fewer dies, creating les pressure and stress on the internal parts of the punch. You can increase the punching capacity from 10% to 50%, depending on which GBC punch you are using. If you start punching with hole #1, pull the punch pins out on dies #2, 4, 6, 8, 10, 12, 14, 16 and 18 as they are not needed. Be aware, not all GBC plastic comb binding machines allow access to all 22 die pins. Always start disengaging pins by starting with what would be the 2nd die pin, and start pulling out every other pin that is accessible to you.
After you have made the necessary adjustments on the Binding Machine you are using, punch the documents for binding with SureBind, and bind it with SureBind strips. If you have any difficulties, just call us and ask us for help. MyBinding carries the full GBC line of Plastic Comb Binding Machines, SureBind Binding Machines and SureBind supplies.
About the Author
Jeff McRitchie is the designer and Director of Marketing for Mybnding.com. He has written over 100 articles on Binding Machines,VeloBind/SureBind Strips, Bindinfg Supplies and more.