 |
 Straight Line Laser Level With Stud Finder $19.95 |
 NEW STANLEY INTELLI LASER PRO 77 260 LASER LINE LEVEL STUD FINDER $30.00 |
 Strait Line 3 Piece Laser System Laser Level Swivel Base Stud Finder $19.99 |
 Black Decker Bullseye Laser Level and Stud Finder BDL100S $24.99 |
 strait line laser level 60 stud finder with tape measure $10.00 |
 BULLS EYE AUTO LEVELING LASER LINESTUD FINDER BDL190S $48.99 |
 Strait Line Laser Level 120 Laser Tape 50 Stud Finder 75 with Case $64.99 |
 BD Bulls Eye Auto Leveling Laser Line and Stud finder $49.99 |
 NEW PRO 3 in 1 Stud Metal AC Voltage Finder Level $78.95 |
Great info resource on Level Stud Finder
Installing Curtain Poles Safely by Jamie Simpson
Installing curtain poles can be an exercise in frustration if not done correctly, and considering the height of some windows, it can be risky as well. Though it is important to follow the instructions provided by the manufacturer, there are a number of basic rules of thumb that can help with the installation of almost any curtain rod.
1. Measure: Measurements are key before making a purchase. Most curtain poles' brackets extend from the window recess by about 15-20 cm and about 15 cm above it. Obstructions may prevent this, so it is important to know the area where the pole would fit. Also, watch for any electric sockets or light switches within 30 cm of the window; there could be wires running in the wall that you will need to avoid later. If your window is high, use a secure step stool or stepladder for this step.
2. Select a curtain pole to fit: With those measurements in mind, it is time to pick the type of curtain pole you want to install. If the rod has a decorative finial, be sure you will have enough room for it on the other side of the brackets.
3. Put together the rod and measure again: Your curtain pole may come in two halves, so you will need to assemble it. Double check the rod's measurements and compare them with your window to get a perfect symmetrical fit.
4. Get a drill: Since your curtain pole brackets will require you to drill into your walls, doors or window frames, you may encounter unknown materials. You will need a drill, and if your walls have concrete, you will want one with hammer action. If you noted the electrical outlets or switches before, you might want to use an electrical stud finder to trace the wiring from the switch or outlet and avoid a nasty shock later.
5. Measure, mark, drill: You will again be measuring and marking, this time with the exact dimensions of your new curtain pole. Measure exactly where you want the first bracket to go, and then use it as a guide to drill the holes for your screws.
6. Install first bracket: Screw your bracket in using the holes you have created. You should be able to do that by changing out your drill bit for a screwdriver bit. For an exceptionally heavy pole, you may need to use those drill holes to place in wall anchors first, then screw into the anchors.
7. Repeat: You will need to measure again on the other side of the window to ensure your final result will be level and symmetrical before installing that bracket as you did the first.
8. Place your curtain pole into the brackets: To avoid doing this twice, you may want to slide your curtains onto the pole before putting it on the brackets. For higher windows, you may need a second set of hands and possibly a second stepladder to quickly and safely get the pole into place. With this step done, so is the project.
About the Author
Find out more about curtain poles
Understanding Laser Line Levels & Stud Finders : What Does a Laser Line Level & Stud Finder Tool Do?