 |
 1 4 1 3 8 HEX SHANK TITANIUM 10 IN 1 STEP DRILLS $11.10 |
 3 PC TITANIUM M2 Step Drill Bit Set Hex Shank $24.99 |
 Cobalt 6 Step Drill Bit 3 16 1 2 Quick Change Hex Shank $12.95 |
 3 16 To 7 8 Titanium Step Drill Bit 12 Sizes M2 HEX $11.99 |
 3 16 To 7 8 Titanium Step Drill Bit 12 Sizes M2 HEX $11.99 |
 10 IN 1 HSS TITANIUM HEX STEP DRILL BIT 10 SIZES NEW $11.67 |
 13 16 to 1 3 8 M2 HEX SHANK HSS TITANIUM STEP DRILL BIT $15.95 |
 NEW 1 4 1 3 8 HEX SHANK HSS TITANIUM STEP DRILL BIT $16.90 |
Great info resource on Hex Step Drill Bit
How to Do Wiring in a Car Stereo System by Jack Wylde
Wiring is the last thing which comes to one's mind who thinks of a new stylish, cool car stereo. It is very essential to hide the wiring for reducing the sound, and to increase performance and aesthetics. All these wires must be well insulated so as to reduce the noise levels. These noises should not be transferred to other wires or cables. A professional and custom look can be given to the car stereo if all these wiring are hidden under the insulation. This also ensures safety of the wires by avoiding contact with the passenger in the car while any kind of accidents. This will also increase the life of the wiring. But how to hide wiring in auto stereo installation?
There are a few things needed to the completion of the task and it includes sheet metal screws, flexible cable tubing, hex bits, cordless drill, wire cutter, Velcro stripping material, putty knife, cable ties and small cable clamps. Using these tools the operation can be performed in a better and simpler way.
The first step involves hiding the wires coming from the connections from the battery. This can be done by attaching specially equipped flexible cable tubing in the car's engine compartment. By using small clamps and sheet metal screws it can be installed to the car's frame. For fixing it with screws drill holes.
In the next step for closing the tubing zip ties are attached and they are placed every two to three feet from the cable tubing. In order to avoid splicing of the wires the available harness wiring are installed. This also helps in keeping the wires together. It makes the job look cleaner and also reduces the chances of any connection fault in the wiring.
The car stereo wires can be hidden under the carpet of the car. In order to avoid noise interference consult a local car shop about which wires should go opposite and which wire can be bundled together. The flexible cable tubing is made flat so as to lay it under the floor. A key point to be noted is that the wires are to be kept away from the sharp objects and hidden wires as they can easily damaged by these objects. The Velcro stripping material can be used keep the cable fixed and this reduces the need for drills and so saves us a lot of time.
In the next step you can hide the wiring under back panel in order to reach to the speakers in the back side of the car. It would be better if you consult an dealer about hoe to remove these wires. While doing this you will find that already present.
The wires are hid behind the trunk carpet in the back side of the car. There are special connectors showing off the connections only at the sub-woofer and the amplifier. Some installations may require custom built panels which covers the wires completely.
For a proper and cool look of the car stereo hiding the wire is very essential, but how to hide wiring in auto stereo installation is a question which can be answered easily by the above steps.
About the Author
Find the best Car Hifi at bargain prices and much more information on Car Audio for the right car stereo. Powernetshop.at have the best product evaluation on the internet.
How to Use Electric Hand Drills : Types of Electric Hand Drill Bits